 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Data Sheet No. PD 10057-I Series PVY116 Microelectronic Power IC HEXFET(R) Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-40V AC/DC, 250mA General Description The PVY116 Series Photovoltaic Relay is a singlepole, normally-open solid-state relay that can replace dry and Mercury-wetted reed relays in many applications. It utilizes International Rectifier's proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED), which is optically isolated from the photovoltaic generator. The PVY116 is ideally suited for use as matrix relay in low voltage ATE applications and general instrumentation applications involving high frequency test signals. This can be accomplished thanks to the extremely low Figure Of Merit (FOM = Coff * Ron), which is the product of the relay's off-state output capacitance and on-state resistance. The PVY116 is packaged in a 4-pin, molded small outline package (SOP-4) with surface mount (gull wing) terminals. It is available in plastic shipping tubes or on tape-and-reel. Please refer to Part Identification information. Features ! ! ! ! ! ! ! ! Low signal distortion at high frequencies Low Coff * Ron Figure Of Merit High off-state resistance Bounce-free operation 1,500 VRMS I/O isolation Long operational life Solid-State Reliability ESD Tolerance 2000V Human Body Model Applications ! Automated Test Equipment ! Instrumentation ! Data Acquisition Part Identification PVY116 PVY116-T surface-mount surface-mount, tape-and-reel (HEXFET is the registered trademark for International Rectifier's power MOSFETs) Series PVY116 Electrical Specifications (-40C TA +85C unless otherwise specified) INPUT CHARACTERISTICS Minimum control current (see Figure 1) Control current for off-state resistance @TA = +25C Control current range (caution: current limit input LED, see Figure 8) Reverse voltage (1mA max.) Units mA mA mA V Min 2.0 -- 2.0 -- Typ -- -- -- -- Max -- 0.2 20.0 7.0 OUTPUT CHARACTERISTICS Operating voltage range Continuous load current @ 40C, 5mA control (see Figure 1) Pulsed load current @ 25C, 5mA control (see Figure 2 and 3) 10ms on, 10% duty cycle Off-state leakage @ 32V, 25C, (see Figure 4) On-state resistance @ 5mA control, IL =100mA (see Figure 2 and 3) Output capacitance Vd=0V, f=1MHz (Cout, see Figure 7) C * R (RDDon x Cout) Turn-on time, 5mA control, 100, 20V (Ton, see Figure 5) 1ms on, 50% duty cycle Turn-off time, 5mA control, 100, 20V (Toff, see Figure 5) 1ms on, 50% duty cycle Units V peak mA mA nA pF pF * S S Min -- -- -- -- -- -- -- -- -- Typ -- -- -- 0.02 3.8 2.4 9.1 110 100 Max 40 250 420 1.0 4.4 3.0 -- 500 500 GENERAL CHARACTERISTICS Dielectric strength, Input to Output Insulation Resistance, Input to Output CI-O (Input to Output Capacitance), Vd = 0V, f = 1MHz Max. pin soldering temperature (10 seconds max.) Ambient temperature range: Operating Storage International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. Units VRMS pF oC oC oC Min 1500 1012 -- -40 -40 Typ -- -- 0.8 Max -- -- -- +260 +85 +100 1 4 2 3 Connection Diagram 2 www.irf.com Series PVY116 300 600 Load Current (mA) 250 Max Load Current (mA) 500 400 300 200 100 -2.5 -2.0 -1.5 -1.0 - 0.5 0.0 0.5 -100 -200 1.0 1.5 2.0 2.5 ILED = 5mA 200 ILED = 2mA 150 100 50 0 0 20 40 60 (oC) -300 -400 -500 -600 Pulsed, 25 C o 80 100 Voltage Drop (VDD) Ambient Temperature Figure 1. Current Derating Curves Figure 2. Typical On Characteristics 500 450 400 Load Current (mA) Leakage Current (A) Pulsed, 20mS, 25 C o 1.0E-07 1.0E-08 25 C o 40 C o 60 C o 85 C o 350 300 250 200 150 100 50 0 0.0 0.5 1.0 1.5 2.0 ILED = 5mA 32V 1.0E-09 20V 1.0E-10 1.0E-11 2.5 3.0 1.0E-12 20 30 40 50 60 o 70 80 90 100 VDD (Volts) Ambient Temperature ( C) Figure 3. Typical On Characteristics Figure 4. Typical Leakage Characteristics www.irf.com 3 Series PVY116 1000 Delay Time (S) Tdly 100 Ton Toff ILED 90% I D 10% tdly ton toff 10 0 5 ILED (mA) 10 15 Figure 5. Typical Delay Times Figure 6. Delay Time Definitions 6 5 Typical Capacitance (pF) Input Current (mA) 20 16 85C lim 4 3 2 1 0 0 5 10 15 20 25 30 VDD Drain to Drain Voltage 4 0 0 0.5 min. de 1.0 max. devi 8 vice & + TYPICA L ce & -45 12 C limit it 1.5 2.0 LED Forward Voltage Drop (Volts DC) Figure 7. Output Capacitance Figure 8. Input Characteristics (Current Controlled) 4 www.irf.com Series PVY116 Case Outlines - 4 Lead SOP 01-2027 01 IR WORLD HEADQUARTERS: 233 Kansas Street, El Segundo, California 90245 Tel: (310) 252-7105 Data and specifications subject to change without notice. 10/17/2003 www.irf.com 5 |
Price & Availability of PVY116-T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |